MARKER
CALIBRATION SETUP

Printing the Marker​

1. Download the PDF files here

2. Print at original size on DIN A2 paper (important!)

3. Use white, matte paper

4. Check print size against the scale indicator

​

​

Attaching the Markers

1. Use a straight, flat wall

2. The bottom edge should be 130–140 cm above the floor

3. Place the prints 70–90cm apart at the same height

4. Attach as straight and flat as possible — no warping

5. Use white tape along the edges

6. Do not tape over the black print (important!)

​

​

Setting the Standing Point

1. Mark a calibration spot approximately 3.5 meters in front of the markers

2. Mark it with tape

​

​

Setting Up Marker Detection in the Quest App

​

​

​

​

​

​

​

1. Go to: Quest App Main Menu / Tools

2. Enable the Marker Tracking toggle

3. Click "Marker Setup"

4. Grant all permissions (important!)

5. Follow the in-game instructions
    

In-Game Marker Re-Calibration

​

​

​

​

​

​

​

1. Stand on the marked standing point

2. Hold the fire and grab buttons on both controllers until a sound plays​

​

​​

​​